2MT Archives - Time & Weather Instruments https://clocksandbarometers.com/morsetaper1mt2mt/2mt/ Sat, 07 Jun 2025 21:23:41 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.2 https://clocksandbarometers.com/wp-content/uploads/2021/04/icon.png 2MT Archives - Time & Weather Instruments https://clocksandbarometers.com/morsetaper1mt2mt/2mt/ 32 32 Universal Pen Mandrels No1 or No.2 MT https://clocksandbarometers.com/product/universal-pen-mandrels-no1-or-no-2-mt/ https://clocksandbarometers.com/product/universal-pen-mandrels-no1-or-no-2-mt/#respond Mon, 08 Feb 2016 13:31:36 +0000 https://clocksandbarometers.com/product/universal-pen-mandrels-no1-or-no-2-mt/ Universal Pen Mandrel allows the majority of pen kits to be turned on a single mandrel. The adjustable shaft length enables you to turn one or two pen components at a time. Each kit is supplied complete with 3 parallel spacers for turning pens with an outside diameter of 7mm and 4 cones for barrel […]

The post Universal Pen Mandrels No1 or No.2 MT appeared first on Time & Weather Instruments.

]]> Universal Pen Mandrel allows the majority of pen kits to be turned on a single mandrel. The adjustable shaft length enables you to turn one or two pen components at a time. Each kit is supplied complete with 3 parallel spacers for turning pens with an outside diameter of 7mm and 4 cones for barrel diameters of 7.5-12mm. The cones have a 90deg included angle which will not mouth the barrel or cause any other damage in normal use. Now supplied with additional lock nut kit for use with larger blanks.

The post Universal Pen Mandrels No1 or No.2 MT appeared first on Time & Weather Instruments.

]]> https://clocksandbarometers.com/product/universal-pen-mandrels-no1-or-no-2-mt/feed/ 0 Hollow Centre 1MT & 2MT https://clocksandbarometers.com/product/holow-centre/ https://clocksandbarometers.com/product/holow-centre/#respond Sun, 07 Feb 2016 23:31:39 +0000 https://clocksandbarometers.com/product/holow-centre/ Hollow Centre 5/8" head with 5/16" bore. Supplied complete with removable centre and Allen key. May also be used as a tail centre when there is a risk of splitting.

The post Hollow Centre 1MT & 2MT appeared first on Time & Weather Instruments.

]]> LONG HOLE BORING. Requires two accessories to provide the guide and drive necessary when using a 5/16″ dia shell auger. The work should be partly bored using the drive centre with the point outwards and the hollow ring centre in the tail stock. The work is then reversed using the drive centre with the pilot to engage in the mouth of the hole and the boring completed.

The post Hollow Centre 1MT & 2MT appeared first on Time & Weather Instruments.

]]> https://clocksandbarometers.com/product/holow-centre/feed/ 0